AWI Standards

StandardsANSI/AWI 0400-2022 - Factory Finishing

ANSI/AWI 0400-2022 - Factory Finishing


American National Standard

Approval of an American National Standard requires verification by the American National Standards Institute (ANSI) that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus of those substantially concerned with its scope and provisions.

Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered and that a concerted effort be made toward their resolution.

The existence of an American National Standard does not in any respect preclude anyone, whether they have approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards.

ANSI does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of ANSI. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard.

CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of ANSI require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards can receive current information on all standards by calling or writing ANSI.

NOTICE ON FORMAT AND STYLE: The format and style of this document differs from ANSI style as specified by the ANSI Style Manual for Preparation of Proposed American National Standards.


The information provided by the Architectural Woodwork Institute (“AWI”) in this document is intended solely for use by appropriately licensed and experienced professionals who have the necessary background to understand and interpret the information in accordance with generally accepted professional standards and regulations. AWI Standards provide the minimum criteria for the concept, design, fabrication, finishing, and installation of architectural woodwork. Provisions for mechanical and electrical safety are not included. References to life-safety requirements may be included but are not meant to be comprehensive. Improper application of the standards set forth herein may result in hazards to health and safety of installers, consumers, and others.

Wood products installed outside of  controlled, interior environments are not governed by this standard.

Illustrations are intended to assist in understanding the standard and may not include all requirements for a specific product or unit, nor do they show the only method of fabrication. Such partial drawings shall not be used to justify improper or incomplete design and/or construction.

The Supplemental Materials are provided as an additional resource to the manufacturer, design professional, educator, user, or certifying organization.
This standard may include citations and quotes from other industry standards and guidelines that are neither developed nor published by AWI, which makes no representation as to the quality or efficacy of such other standards or guidelines.

AWI publishes the information provided in this document after undertaking reasonable inquiry regarding the subject matter. AWI publishes this standard in furtherance of its mission of benefiting the architectural woodwork industry. All or any portion of this standard may be revised or withdrawn at any time. AWI standards are voluntary. AWI is not responsible for any results of use of this standard or performance of products used or created in connection with this standard. AWI makes no representation or warranty regarding the technical accuracy or sufficiency of the standard; nor does AWI represent or warrant that the standard conforms to any statute or regulation. AWI hereby disclaims any warranty of any kind, express or implied, with respect to the information contained herein, including merchantability or fitness for a particular purpose.

AWI shall not be responsible to anyone for the use of or reliance upon this standard. AWI shall not incur any obligation nor liability for damages, including consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this standard, except for the refund of any amount paid to AWI for this document by the affected user.

Copyright © 2022 by Architectural Woodwork Institute—All rights reserved.

No part of this publication may be reprinted or reproduced in any form without the prior written consent of the Architectural Woodwork Institute.


(This foreword is not a part of American National Standard AWI 0400-2022 – Factory Finishing)

ANSI/AWI 0400–2022 – Factory Finishing is intended to provide standardized objective criteria for the evaluation of the performance and aesthetic attributes of finish technologies applied to architectural and related interior products.  The information contained within these requirements will provide standards to benefit owners, manufacturers, suppliers, design professionals, and contractors, among others.

This standard establishes criteria for the factory application of finish technologies to architectural woodwork and related interior finishes, ensuring that the final product is of the utmost quality with regards to visual appeal and structural integrity.

This standard is intended for use by individuals and organizations from all aspects of the architectural woodwork industry, including architects, design professionals, manufacturer/suppliers, general contractors, installers, and end users. Individuals within the architectural woodwork industry will use this standard to maintain a high degree of control over the aesthetic quality and the structural integrity of their products, ensuring that potential differentiations in the workmanship and implementation of  projects are made uniform.

The requirements contained within this standard are derived from AWI’s Architectural Woodwork Standards that the organization has been publishing in various formats since its inception in 1953. Each requirement has been thoroughly vetted by a committee of leading volunteer professionals in the architectural woodwork industry to ensure that the content is up-to-date and relevant to the current industry requirements.

Effective August 15, 2022, this standard succeeds, replaces, and supplants Section 5 of
the Architectural Woodwork Standards, Ed. 2 (2014) as the most current version of the AWI Standard for Factory Finishing.

Suggestions for the improvement of this standard will be welcome. Suggestions should be sent to:
Architectural Woodwork Institute
46179 Westlake Drive, Suite 120
Potomac Falls, VA 20165

AWI Standards Development:
Doug Hague, Executive Vice President
Hunter Morrison, Technical Director
Cheryl Dermyre, Technical Project Manager
Jairus Whitley, Graphic Designer

This standard was processed and approved for submittal to ANSI by Accredited Standards Committee on AWI 0400 Factory Finishing. Committee approval of the standard does not necessarily imply that all committee members voted for its approval. At the time it approved this standard, the AWI 0400 Factory Finishing Committee had the following members:

AWI Technical Committee:
Cory Bittner, Committee Chair – TMI Systems Corporation
Jordan Backs – Pittsburg State University
Philip Duvic – Non-Voting Member
Randy Jensen – Leonard Peterson & Company, Inc.
Greg Lutz, Committee Chair – Lutz Woodworks
Michael McNulty – Architectural Woodwork Institute (AWI)
William Munyan – R&M Group Architects
Greg Parham – AWI Quality Certification Corporation (QCC)

The following organizations, recognized as having an interest in the standardization of Factory Finishing, were contacted prior to the approval of this standard. Inclusion in this list does not necessarily imply that the organization concurred with the submittal of the proposed standard to ANSI.

National Wood Flooring Association (NWFA)
Window & Door Manufacturers Association (WDMA)
Kimball International
Steelcase Inc.
Woodwork Institute
Sherwin-Williams Company
CIC Coatings
AWI Quality Certification Corporation (QCC)
CW Keller & Associates
Kewaunee Scientific Corporation

1.0 Purpose

a) Provide standardized objective criteria for the evaluation of the performance and aesthetic attributes of finish technologies (henceforth referred to as “Product”) applied to architectural woodwork and related interior products.

2.0 Scope

a) Factory application of finish technologies to architectural  and related interior finishes.

2.1 Included

a) The application of transparent or opaque Product on architectural woodwork and related interior finishes specified to be factory finished.

b) The application of primer prior to delivery to the jobsite.

2.2 Not Included

a) Jobsite finishing.

b) Repair after delivery or installation.

c) Brush applied topcoat finishes, except as called out under the scope of work, such as faux finishes.

d) Exterior priming, painting, and finishing.

e) Doors included in the scope of ANSI/WDMA I.S. 1A (latest edition) and/or ANSI/WDMA I.S. 6A (latest edition).

Optimum Climate Controlled Relative Humidity table
Figure 2
Figure 3
Figure 4
Figure 66
Figure 67
Figure 65
3-3-4-1 Epoxy Resin
3-3-4-5 Solid Phenolic
ANSIAWI 0620-2018-awi-fig6
ANSIAWI 0620-2018-awi-fig7
ANSIAWI 0620-2018-awi-fig13
ANSIAWI 0620-2018-awi-fig14
ANSIAWI 0620-2018-awi-fig23
ANSIAWI 0620-2018-awi-fig25
ANSIAWI 0620-2018-awi-fig43
ANSIAWI 0620-2018-awi-fig51
ANSIAWI 0620-2018-awi-fig52
ANSIAWI 0620-2018-awi-fig53
ANSIAWI 0620-2018-awi-fig54
ANSIAWI 0641-2019-awi-fig18
ANSIAWI 0641-2019-awi-fig19
ANSIAWI 0641-2019-awi-fig20
ANSIAWI 0641-2019-awi-fig21
ANSIAWI 0641-2019-awi-fig22
ANSIAWI 0641-2019-awi-fig23
ANSIAWI 0641-2019-awi-fig24
ANSIAWI 0641-2019-awi-fig25
ANSIAWI 0641-2019-awi-fig26
ANSIAWI 0641-2019-awi-fig27
ANSIAWI 0641-2019-awi-fig28
ANSIAWI 0641-2019-awi-fig29
ANSIAWI 0641-2019-awi-fig31
ANSIAWI 0641-2019-awi-fig32
ANSIAWI 0641-2019-awi-fig36
ANSIAWI 0641-2019-awi-fig43
ANSIAWI 0641-2019-awi-fig72
ANSIAWI 0641-2019-awi-fig85
ANSIAWI 1232-2022-awi-fig5
ANSIAWI 12322022-awi-fig15
ANSIAWI 12322022-awi-fig16
ANSIAWI 1232-2022-awi-fig18
ANSIAWI 1232-2022-awi-fig19
ANSIAWI 1232-2022-awi-fig20
ANSIAWI 1232-2022-awi-fig22
ANSIAWI 1232-2022-awi-fig23
ANSIAWI 1232-2022-awi-fig24
ANSIAWI 1232-2022-awi-fig25
ANSIAWI 1232-2022-awi-fig26
ANSIAWI 1232-2022-awi-fig27
ANSIAWI 1232-2022-awi-fig29
ANSIAWI 1232-2022-awi-fig32
ANSIAWI 1232-2022-awi-fig35
ANSIAWI 1232022-awi-fig41
ANSIAWI 1232-2022-awi-fig43
ANSIAWI 1232-2022-awi-fig72
ANSIAWI 1232022-awi-fig103
ANSIAWI 1232022-awi-fig104
ANSIAWI 1236-2022-awi-fig5
ANSIAWI 1236-2022-awi-fig23
ANSIAWI 1236-2022-awi-fig24
ANSIAWI 1236-2022-awi-fig25
ANSIAWI 1236-2022-awi-fig43
ANSIAWI 1236-2022-awi-fig47
ANSIAWI 1236-2022-awi-fig48
ANSIAWI 1236-2022-awi-fig110
ANSIAWI 1236-2022-awi-fig111
ANSIAWI 1236-2022-awi-fig112