ANSI/AWI 0641-2019 - Architectural Wood Casework

Introduction

American National Standard

Approval of an American National Standard requires verification by the American National Standards Institute (ANSI) that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus of those substantially concerned with its scope and provisions.

Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered and that a concerted effort be made toward their resolution.

The existence of an American National Standard does not in any respect preclude anyone, whether they have approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards.

ANSI does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of ANSI. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard.

CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of ANSI require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards can receive current information on all standards by calling or writing ANSI.

NOTICE ON FORMAT AND STYLE: The format and style of this document differs from ANSI style as specified by the ANSI Style Manual for Preparation of Proposed American National Standards.

Disclaimer

The information provided by the Architectural Woodwork Institute (“AWI”) in this document is intended solely for use by appropriately licensed and experienced professionals who have the necessary background to understand and interpret the information in accordance with generally accepted professional standards and regulations. AWI Standards provide the minimum criteria for the concept, design, fabrication, finishing, and installation of architectural woodwork. Provisions for mechanical and electrical safety are not included. References to life-safety requirements may be included but are not meant to be comprehensive. Improper application of the standards set forth herein may result in hazards to health and safety of installers, consumers, and others.

Wood products installed outside of , interior environments are not governed by this standard.

Illustrations are intended to assist in understanding the standard and may not include all requirements for a specific product or unit, nor do they show the only method of fabrication. Such partial drawings shall not be used to justify improper or incomplete design and/or construction.

The Supplemental Materials are provided as an additional resource to the manufacturer, design professional, educator, user, or certifying organization.

This standard may include citations and quotes from other industry standards and guidelines that are neither developed nor published by AWI, which makes no representation as to the quality or efficacy of such other standards or guidelines.

AWI publishes the information provided in this document after undertaking reasonable inquiry regarding the subject matter. AWI publishes this standard in furtherance of its mission of benefiting the architectural woodwork industry. All or any portion of this standard may be revised or withdrawn at any time. AWI standards are voluntary. AWI is not responsible for any results of use of this standard or performance of products used or created in connection with this standard. AWI makes no representation or warranty regarding the technical accuracy or sufficiency of the standard; nor does AWI represent or warrant that the standard conforms to any statute or regulation. AWI hereby disclaims any warranty of any kind, express or implied, with respect to the information contained herein, including merchantability or fitness for a particular purpose.AWI shall not be responsible to anyone for the use of or reliance upon this standard.

AWI shall not incur any obligation nor liability for damages, including consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this standard, except for the refund of any amount paid to AWI for this document by the affected user.

Copyright © 2019 by Architectural Woodwork Institute-All rights reserved.

No part of this publication may be reprinted or reproduced in any form without the prior written consent of the Architectural Woodwork Institute.

Foreword

(This foreword is not a part of American National Standard AWI 0641-2019 – Architectural Wood Casework)

The ANSI/AWI 0641 – Architectural Wood Casework Standard is intended to provide standards and tolerances for the quality and fit of Architectural Wood Casework and related interior finishes.

This standard encompasses a variety of architectural wood casework, including wood -faced architectural cabinets, plastic-laminate-clad architectural cabinets, and cabinet and drawer hardware as specified under CSI MasterFormat Division 6.

This standard establishes structural and aesthetic tolerances for each of the aforementioned applications, ensuring that the final product is of the utmost quality with regards to visual appeal and structural integrity.

This standard is intended for use by individuals and organizations from all aspects of the architectural woodwork industry, including architects, design professionals, manufacturer/suppliers, contractors, installers, and end users. Individuals within the architectural  industry will use this standard to maintain a high degree of control over the aesthetic quality and the structural integrity of their work, ensuring that potential differentiations in the workmanship and implementation of  projects are made uniform.

The requirements contained within this standard are derived from AWI’s Architectural Woodwork Standards that the organization has been publishing in various formats since its inception in 1953. Each requirement has been thoroughly vetted by a committee of leading volunteer professionals in the architectural woodwork industry to ensure that the content is up-to-date and relevant to the current industry requirements.

Effective June 1, 2020, this standard succeeds, replaces, and supplants Section 10 of the Architectural Woodwork Standards, Ed. 2 (2014) as the most current version of the AWI Standard for Architectural Wood Casework.

Suggestions for the improvement of this standard will be welcome. Suggestions should be sent to:
Architectural Woodwork Institute
46179 Westlake Drive, Suite 120
Potomac Falls, VA 20165

AWI Standards Development:
Philip Duvic, Executive Vice President
Ashley Goodin, Technical Director
Cheryl Dermyre, Technical Project Manager
Michael Murray, Technical Editor
Jairus Whitley, Graphic Designer

This standard was processed and approved for submittal to ANSI by Accredited Standards Committee on AWI 0641 Architectural Wood Casework. Committee approval of the standard does not necessarily imply that all committee members voted for its approval. At the time it approved this standard, the AWI 0641 Architectural Wood Casework Committee had the following members.

Greg Lutz, Committee Chair – Lutz Woodworks
Greg Parham – AWI Quality Certification Corporation (QCC)
Michael McNulty – Architectural Woodwork Institute (AWI)
Tyler Cerny – Strata Design
Randy Jensen, Committee Chair – Leonard Peterson & Company, Inc.
Patrick Molzahn – Madison Area Technical College
William Munyan – R&M Group Architects
Cory Bittner – TMI Systems Corporation

The following organizations, recognized as having an interest in the standardization of Architectural Wood Casework, were contacted prior to the approval of this standard. Inclusion in this list does not necessarily imply that the organization concurred with the submittal of the proposed standard to ANSI.

AWI Quality Certification Program
Composite Panel Association
Decorative Hardwoods Association (HPVA)
Woodwork Institute
Michigan Career & Technical Institute
Degips Contracting Co.
Arauco-NA
Egger Wood Products, LLC
DG Martin and Associates
TMI Systems Corporation
Timber Products Company
Advanced Cabinet Systems (ACS)
Leonard Peterson & Company, Inc.
LG Hausys America, Inc.
Highcam Engineeing
Volpe Millwork, Inc
Perkins & Will
Construction Specifications Institute (CSI)
Corgan
EGRG LLC

1.0 Purpose

a) Provide standards and tolerances for the quality and fit of Architectural Wood Casework and related interior finishes (henceforth referred to as “Product”).

b) Establish minimum aesthetic and performance requirements intended to provide a well-defined degree of control over a project’s quality of materials and workmanship for the manufacture of Architectural Wood Casework.

2.0 Scope

Provides aesthetic and performance standards for Product designed and manufactured/supplied for specific construction projects.

2.1 Included

a) Product as specified under CSI MasterFormat Divisions:
06 41 00 Architectural Wood Casework
06 41 13 Wood-Veneer-Faced Architectural Cabinets
06 41 16 Plastic-Laminate-Clad Architectural Cabinets
06 41 93 Cabinet and Drawer Hardware

2.2 Not Included

a) Installation of Product.

b) Product as specified under CSI MasterFormat Division 12

c) Structural components, grounds, in-wall blocking, backing, furring, brackets, or other anchorage that become an integral part of the building’s walls, floors, or ceilings are not furnished or installed under the scope of this standard’s requirements.